Advanced Aesthetics • Regulated Training • Trusted Clinical Care

The ALD1 quad wavelength combo laser system
Skintastic Aesthetic Supplies

ALD1Dermatological Quad Wavelength Diode Laser System

Clinically Engineered. Commercially Powerful. Exclusively Skintastic.

Quad wavelength diode, 755, 808, 940 and 1064nm, safe across every Fitzpatrick type. Portable, powerful and supplied with the training, governance and documentation to put it straight into practice.

  • MHRA registered medical device
  • Class 4 laser, BS EN 60825-1
  • 800W US Coherent diode
  • Ofqual regulated training included
£8,999plus VAT

Finance available, subject to status and lender approval.

Free UK delivery on all orders over £99

  • MHRA registered device
  • BMLA member
  • FCA authorised for finance
  • Ofqual regulated training
  • Established 2011

Registration with, or membership of, any body named here does not imply their endorsement or approval of Skintastic or of this device.

Clinical platform

One diode platform, every skin type

The ALD1 delivers four diode wavelengths as a single blended output, so one machine treats Fitzpatrick I through to VI without swapping systems.

755nm

Shorter wavelength with strong melanin absorption, for fine and lighter hair on lighter skin types.

808nm

The workhorse wavelength. Deep enough for the follicle, comfortable enough for high volume work.

940nm

Adds vascular absorption and reaches slightly deeper into the dermis.

1064nm

The safe choice for Fitzpatrick V and VI, with far lower epidermal melanin absorption.
ALD1 CH handpiece with interchangeable spot size tips

Three spot sizes, recognised automatically

Three interchangeable tips cover every body zone. 3D magnetic smart tip recognition means the machine knows which tip is fitted and adjusts the preset parameters as you change it, so the operator is not resetting the machine by hand between areas.

  • 30 × 25mm for large body areas, legs, back and chest
  • 15 × 15mm for facial work and smaller zones
  • 8mm precision tip for delicate and sensitive areas
Patient comfort

360 degree sapphire contact cooling

Cooling runs the full length of the applicator, from the tip through to the handle, rather than only at the point of contact. That gives continuous contact cooling coverage through the pass rather than cooling that fades as the tip warms.

A built in PT100 sensor monitors handpiece temperature with high accuracy, and the system continuously detects cooling temperature and output energy during operation. If either drifts, you know about it.

Sapphire contact cooling helps maintain a stable treatment temperature and supports epidermal protection through the treatment.

Safety systems

Real time monitoring, not assumptions

Cutaway of the ALD1 handpiece showing the integrated monitor module

PT100 sensor

A built in high precision sensor monitors handpiece temperature continuously.

Energy detection

The system detects cooling temperature and output energy in real time during operation.

Intelligent alarms

Alerts for water flow, temperature calibration, water level and operational safety.

Shot counter

Total shot recorder, so servicing and consumable life are based on fact rather than guesswork.
Power system

44,000 µF of stored energy

Two industrial grade 22,000 microfarad capacitors give a combined 44,000 microfarad energy system. That is what holds the output steady when the machine is being worked hard through a full clinic day rather than sagging after the first hour.

Optimal Pulse Technology delivers a controlled square wave pulse, so the energy the client receives on the last pass matches the first.

Industrial grade capacitor bank inside the ALD1
Clinical management

Every client, every setting, recorded

ALD1 touchscreen showing the client treatment record system

The integrated treatment record system saves individual client parameters, so wavelength, fluence and pulse duration are stored against the client and retrieved instantly at the next session.

  • Save individual client parameters
  • Store wavelength, fluence and pulse duration
  • Track treatment response history
  • Retrieve previous session settings instantly
  • Fifteen language options
  • Rental mode for machines placed with other clinics
Technical specification

ALD1 specification

Device typeDermatological diode laser system
Wavelengths755nm, 808nm, 940nm and 1064nm, delivered as one blended output
Diode output power800W
Energy density1 to 166 J/cm²
Pulse frequency1 to 10Hz
Spot sizes30 × 25mm, 15 × 15mm and 8mm, with 3D magnetic tip recognition
Laser barsUS Coherent
Diode lifespan20 million shots
Cooling360 degree sapphire contact cooling, tip to handle, with PT100 monitoring
Capacitor system2 × 22,000 µF, 44,000 µF total
Laser classClass 4 medical laser, BS EN 60825-1
Continuous use10 to 12 hours
Electrical110V or 220V compatible
Net weight33 kg
Skin typesFitzpatrick I to VI
Regulatory standing

Registered, certified and traceable

Every claim below is evidenced by a document held on file, and a copy pack is supplied with the machine.

ManufacturerBeijing Stelle Laser Technology Co., Ltd., Daxing District, Beijing, China
Manufacturer SRNCN-MF-000038245
Risk classificationClass IIa
Basic UDI-DI697669578ALD1UV
Notified bodyTÜV Rheinland LGA Products GmbH, number 0197
EC certificateHD 2264988-1, Full Quality Assurance System, Directive 93/42/EEC Annex II excluding (4). Issued 23 April 2021. Surveillance audit confirmed 25 January 2024.
Continued validityConfirmed by TÜV Rheinland on 12 April 2024 under Article 120 of Regulation (EU) 2017/745 as amended by Regulation (EU) 2023/607. May continue to be placed on the market to 31 December 2028. For the Great Britain market, MHRA guidance provides that CE marked devices certified under Directive 93/42/EEC may be placed on the GB market until the sooner of certificate expiry or 30 June 2028.
MHRA registrationRegistered 24 May 2024, application reference 2024052201363378, GMDN 58786, dermatological diode laser system
UK Responsible PersonMedPath Limited, 27 Old Gloucester Street, London, WC1N 3AX
Skintastic roleUK importer and distributor
Standards appliedIEC/EN 60601-1, IEC/EN 60601-1-2, IEC/EN 60601-2-22, IEC/EN 60825-1, ISO 13485

Registration of a medical device with the MHRA does not represent accreditation, certification, approval or endorsement by the MHRA. This page is not a Declaration of Conformity. That document is drawn up and signed by the manufacturer and a copy is supplied with the machine.

Clinical governance

Named Laser Protection Adviser included

Dr Godfrey Town, Laser Protection Adviser

Every ALD1 is supplied within a governance framework overseen by Dr Godfrey Town, one of the UK’s leading Laser Protection Advisers. Twelve months of LPA support is included with the machine.

  • Bespoke Local Rules prepared for your device and your premises
  • Comprehensive laser risk assessment aligned with UK safety regulations
  • On site audit report confirming compliance readiness
  • Dr Godfrey Town named as your LPA for twelve months
  • Ongoing compliance guidance to maintain your regulatory standing
What is included

Everything needed to start treating

Installation and setup

Engineer delivery and installation, full system calibration, on site PAT testing, operational handover and treatment parameter optimisation.

Training

Four days of manufacturer training at the Southampton academy, with live model practical sessions and one to one training included.

Governance

Twelve months of Laser Protection Adviser support with Dr Godfrey Town, Local Rules, risk assessment and site audit report.

Start up kit

Comprehensive start up kit, safety eyewear, blackout shields, consumables and analyser probe.

Documentation

Full compliance documentation pack, certificates, MHRA registration confirmation and supporting test reports.

Warranty

18 months on the machine, 12 months on the diode bars. Extended cover available at the time of purchase.

Qualification pathway included

If you already hold a Level 3 Anatomy and Physiology, the Level 4 Laser and IPL RQF pathway is included. If you do not, a discounted Level 3 pathway is available. If you already hold Level 4, the Level 5 Tattoo Removal RQF qualification is included instead. Both are Ofqual regulated through Focus Awards. See the regulated qualifications.

Buying

Choose the purchase route that suits your clinic

1

Complete Clinical Package

£8,999 plus VAT. Includes the ALD1 device, engineer delivery, installation and calibration, on site PAT testing, operational handover, four days of manufacturer training at the Southampton academy, twelve months of Laser Protection Adviser support, the start up kit and the full compliance documentation pack.

2

Qualified Practitioner Package, 10% off

£8,099.10 plus VAT. Available where the purchaser already holds both a regulated Level 3 Anatomy and Physiology qualification and a regulated Level 4 Laser and IPL qualification. Evidence of both must be supplied and approved before the discount is applied.

3

Machine Only Purchase, 20% off

£7,199.20 plus VAT. Available for established clinics and suitably qualified practitioners requiring the device only. Excludes engineer installation, PAT testing, LPA services, training and regulated qualifications.

The rest of the range

Other systems we supply

DPL4 Combo System

Four platforms in one, diode, Q-switched Nd:YAG, E-Light IPL and radio frequency. £21,999 excluding VAT.

ADPL-2 CH and Nd:YAG

Two handpiece diode and Nd:YAG platform for hair and tattoo removal. £11,999 excluding VAT.

See the full range

Every machine we supply, with specifications, warranty terms and finance options.
Licensing and governance

Who you will need, and where you will need them

Buying the laser is the straightforward part. What stops clinics trading is usually the paperwork around it, and most people meet these three roles for the first time when a council asks for them. Here is what each one is, in plain terms.

LPA

Laser Protection Adviser

An independent, certified laser safety specialist, normally RPA2000 registered. The LPA carries out a site audit of your treatment room, writes your Local Rules and risk assessment, specifies the correct protective eyewear for your exact wavelengths, and defines the controlled area. This is the appointment a licensing authority will always ask about. Your LPA is not your supplier and should not be.

LPS

Laser Protection Supervisor

Usually you, or a senior member of your team. The LPS is the person on site who is responsible day to day for the Local Rules actually being followed, for keeping the treatment register and the authorised user register, and for making sure nobody operates the machine who is not trained and named. The LPA writes the rules. The LPS lives by them.

EMP

Expert Medical Practitioner

A GMC registered doctor who issues your written Treatment Protocol for that specific device and remains available for clinical advice, on photosensitive medication, on adverse reactions and on contraindications. Their CV, GMC registration and insurance schedule are supplied for your council inspector. Also referred to as an ERHP.

Not every authority writes the EMP into its licence conditions. Some do, some treat it as advisory and some simply ask you to hold a list of practitioners. Our own Laser Protection Adviser recommends appointing one in every case, because a protocol cannot be back-dated and a doctor is only realistically available to you after an incident if they were already retained before it.

Where a licence is required

Licensing is not national. It depends on whether your council holds the local powers, which is why two clinics doing identical work in different towns can face completely different requirements. These are the areas where a licence is commonly required for laser and IPL.

AreaAuthorities
All 32 London boroughsBarking and Dagenham, Barnet, Bexley, Brent, Bromley, Camden, Croydon, Ealing, Enfield, Greenwich, Hackney, Hammersmith and Fulham, Haringey, Harrow, Havering, Hillingdon, Hounslow, Islington, Kensington and Chelsea, Kingston upon Thames, Lambeth, Lewisham, Merton, Newham, Redbridge, Richmond upon Thames, Southwark, Sutton, Tower Hamlets, Waltham Forest, Wandsworth and Westminster
NottinghamshireNottingham City, Broxtowe, Gedling and Rushcliffe
Kent and MedwayAshford, Canterbury, Dartford, Dover, Folkestone and Hythe, Gravesham, Maidstone, Medway, Sevenoaks, Swale, Thanet, Tonbridge and Malling, Tunbridge Wells
SussexBrighton and Hove, Eastbourne, Lewes and Wealden
MidlandsBirmingham, Coventry, Derby, Leicester, Northamptonshire, Staffordshire, Stoke-on-Trent and Worcestershire
North EastDarlington, Durham, Hartlepool, Middlesbrough and Stockton-on-Tees
Wales, Scotland and Northern IrelandRegulated instead by the national healthcare inspectorates, HIW in Wales, HIS in Scotland and RQIA in Northern Ireland

This list is a guide and not a substitute for asking. Powers change, and some authorities apply them differently from their neighbours. Before you commit to premises, telephone the licensing team at your own council and ask two questions: do we need a special treatment licence for laser and IPL, and do your conditions require an Expert Medical Practitioner. Get the answer in writing.

If your council does not hold these powers, you are not off the hook. Your obligations under the Health and Safety at Work etc. Act 1974, the Control of Artificial Optical Radiation at Work Regulations 2010 and BS EN 60825 apply everywhere, and your insurer will ask for the same documents whether or not a licence is involved.

Scotland, Wales and Northern Ireland

Different rules again, and the reason clinics there struggle to buy

Outside England there is no council licence. Instead the clinic itself is registered and inspected by a national healthcare inspectorate, and the standard of documentation they expect is higher, not lower. This is where most machines on the market fall down, and it is the most common reason a clinic in Cardiff or Glasgow cannot find a laser it is allowed to buy.

Wales

HIW

Any independent service using Class 3B or Class 4 laser or IPL equipment must register with Healthcare Inspectorate Wales under the Care Standards Act 2000 and the Independent Health Care (Wales) Regulations 2011, and meet the National Minimum Standards. Inspections are announced, with up to twelve weeks of notice, and findings are published. HIW has issued cautions to providers operating laser services unregistered.

Scotland

HIS

Independent clinics register with Healthcare Improvement Scotland under the regulation of independent healthcare. Registration covers the service and the premises, and the inspection looks at your equipment documentation, your Laser Protection Adviser arrangements and your staff competence together.

Northern Ireland

RQIA

Independent services using lasers and IPL are registered and inspected by the Regulation and Quality Improvement Authority. As in Wales and Scotland, the clinic is registered rather than the premises being licensed by a council.

What an inspector actually asks to see

In all three nations the inspection turns on documents. These are the ones that concern the machine itself, and they are the ones we supply with every machine we supply.

  • The notified body certificate, naming the body and its number
  • Evidence of device registration and who the UK Responsible Person is
  • The manufacturer conformity documentation
  • The classification, Class 4 to BS EN 60825-1
  • Full instructions for use in English, not a brochure
  • Wavelengths, maximum output and pulse parameters for eyewear specification
  • Compliance with BS EN 60601-2-22 for the laser
  • Test reports and the technical file for your LPA

One distinction worth knowing, because sellers blur it. HIW, HIS and RQIA register the clinic, not the machine. No laser is HIW registered or HIS approved, and anybody telling you otherwise is misleading you. What the machine needs is a complete and accurate documentation pack so that your registration can succeed.

That is the whole difficulty. Plenty of machines are sold in the United Kingdom at attractive prices with a certificate that turns out to cover electrical safety rather than medical device conformity, with a manual that is really a sales brochure, or with no named UK Responsible Person at all. A clinic in Wales or Scotland often only discovers the gap when the inspector asks, by which point they own the machine.

We send the documentation pack before you buy, not after. If you are registering with HIW, HIS or RQIA, ask and we will email the certificates, the registration confirmation, the test reports and the instructions for use, so that you or your adviser can check them against your application before you spend anything.

The people behind it

Meet the team

Built on laser expertise, and committed to your success. When you buy a medical device from us you are buying the people who answer for it afterwards.

Carla Cooper-Gale

Carla Cooper-Gale

Managing Director

Over fifteen years of specialist laser experience, with more than 7,500 students trained. Carla is the named UK Responsible Person to the MHRA for the devices Skintastic registers, and she handles the regulatory side of every sale personally.

  • Medical device compliance
  • Assessor
  • IQA
  • Level 5 DET
Brenda West

Brenda West

Internal Quality Assurer

A retired senior nurse with decades of clinical experience, Brenda maintains the standards of training, assessment and the award of qualifications. She is the reason our training holds up when an awarding body looks at it.

  • Senior nurse, retired
  • IQA
Dr Godfrey Town, PhD

Dr Godfrey Town, PhD

Laser Protection Adviser

A Registered Laser Protection Technologist and Medical Physicist with a PhD in laser physics, and decades of experience advising clinical and research environments on laser safety. Every system we supply sits inside his governance framework.

  • PhD laser physics
  • Registered LPA
  • Medical physicist

Skintastic Aesthetic Supplies Ltd is registered in England and Wales, company 11028743, registered office 26 The Avenue, Southampton SO17 1XL. VAT 368 8599 17. Authorised and regulated by the Financial Conduct Authority, firm reference 964293. We act as a credit broker, not a lender. MedPath Limited is the UK Responsible Person for the Stelle machines and Skintastic Aesthetic Supplies Ltd is the UK importer and supplier.

Buying direct from the factory

Clinics are sometimes offered the same machine directly by the manufacturer at a lower headline price. We would rather set out plainly what that price does not include than pretend the offer is not made.

Through Skintastic

Included in the price

  • Engineer installation and calibration
  • On site PAT testing and operational handover
  • Ofqual regulated qualification pathway and Core of Knowledge
  • Twelve months of named Laser Protection Adviser support
  • Bespoke local rules written for your premises
  • Eighteen month UK warranty, twelve months on the diode bars and lamp
  • UK engineer servicing, spares and consumables held here
  • FCA regulated finance
  • Custom shell, engraved logo and LED handpiece branding

Direct from the factory

What lands on you instead

  • You become the importer of record, and you are the one the MHRA comes to
  • You must hold the technical documentation yourself
  • You must produce the certificate for your insurer, your LPA and your council
  • In a London borough they ask before granting your special treatment licence
  • You must satisfy yourself the exact model is on the notified body certificate
  • No UK warranty and no UK engineer
  • A fault means shipping a handpiece to Beijing at your cost, and waiting
  • No training, no local rules and no LPA
  • Those are the documents an inspection actually looks at

A device imported directly from the manufacturer carries none of the first column, and the purchaser themselves takes on the legal obligations of the importer under the UK Medical Devices Regulations.

We are not saying this to protect a margin. We are saying it because we have spent this year sorting out exactly these problems for clinics who bought elsewhere, and it is far harder to fix afterwards than to get right at the start.

Finance

Pay for it out of what it earns

Most clinics finance rather than buy outright, and the ALD1 is available on business equipment finance over two, three, four or five years. Skintastic Aesthetic Supplies Ltd is FCA authorised, firm reference 964293. We act as a credit broker, not a lender, and we take no commission from the lender.

Work out the payment

Put the price excluding VAT into the calculator and it will show you an indicative monthly figure over each term, with a separate set for businesses trading under three years.

Want a decision today?

Download the Kennet enquiry form, fill it in and send it straight back to us on WhatsApp. We start the background checks the same day and a decision in principle usually comes back within two hours in working hours.

Or just ask

Tell us the machine and the term you have in mind and we will come back with a quotation. No obligation, and no fee for the introduction.

Ready to talk it through

We would rather have an honest conversation about whether this machine will pay for itself in your clinic than sell you the wrong thing. Message us and we will give you a straight answer.

ADLP-2 diode and IPL SHR laser system with interchangeable spot size heads
Scroll to Top